White Knight Splashes

• Quick drying
• Easy to apply and clean
  
• Large range of colours
  
• Water based
  
• Interior and exterior application

• White Knight Splashes can be used on suitably prepared timber, metal, ceramics, fibreglass and glass.

How To Apply

1. PREPARATION

• Thoroughly clean the surface and ensure it is free from grease, oil, dirt, rust scale and other contaminants.
• Lightly sand wooden, previously painted or glossy surfaces.
  
• Bare metal should be primed with an appropriate White Knight Rust Guard? Metal Primer.
  
• No primer is needed on timber except where tannin staining may be present (e.g., hardwoods).
  
• Apply one coat of Splashes Undercoat when primer is dry.

2. APPLICATION

• Stir or shake the can before use.
• Apply two coats leaving 2 hours drying between coats.

3. COVERAGE

• Approximately 16m2 per litre, depending on the nature of the surface.

4. DRYING

• Touch dry in 30 minutes. Recoat after 2 hours. Hard dry within 24 hours. Drying will be slower in cold or humid conditions, in the absence of ventilation or where heavy film builds are applied.

5. CLEAN UP

• Clean equipment and brushes with water.

6. SAFETY & FIRST AID
KEEP OUT OF REACH OF CHILDREN.

• This product is highly flammable. Store and use away from heat and eliminate any source of ignition.
• If swallowed, drink plenty of water and seek medical advice immediately. Do not induce vomiting.
  
• If in eyes, immediately flush with running water for at least 15 minutes. Seek immediate medical attention.
  
• Avoid breathing vapour or mist.
  
• Use only with adequate ventilation.
  
• If on skin, remove contaminated clothing. Wash skin thoroughly with soap and water.
  
• For 24 hour medical emergency response in Australia call 1800 807 001 and in New Zealand call 0800 154 666

7. ENVIRONMENT

• Do not pour unwanted paint down the drain.
• Keep unwanted paint in sealed containers for disposal via special chemical waste collections.
  
• Empty paint containers should be left open in a well ventilated area to dry out. When dry, recycle steel containers via can recycling programs.
  
• Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.