DescriptionPOWERZONE two channel amplifier highlighted with bright Crunch red heatsink elements feature high level inputs utilizing SPEED-FET output devices and QTD Technology produces 2000 watts of power in a stereo or bridged mono application.
Category:
?PowerzoneSKU:
?806576227748Part #:
?PZ-2020.2Specifications
-
CLASS
Class A/B
-
VARIABLE VOLTAGE
6V - 0.2V
-
SIGNAL TO NOISE
>90dB
-
FREQUENCY RESPONSE
10Hz-45KHz
-
CROSSOVER
VeraCross
Switchable
FULL / LPF / HPF
-
VARIABLE HIGH PASS CROSSOVER 12DB PER OCTAVE
60Hz - 1.2kHz
-
VARIABLE LOW PASS CROSSOVER 12DB PER OCTAVE
30Hz - 250Hz
-
BASS BOOST
0 - 9dB
-
POWER @ 1 OHM
N/A
-
POWER @ 2 OHMS
2 x 1000 Watts
-
POWER @ 4 OHMS
2 x 500 Watts
-
MONO BRIDGED @ 4 OHMS
1 x 2000 Watts
-
TOTAL CHANNELS
2
-
AUDIO INPUTS
RCA
-
AUDIO OUTPUTS
Full Range
RCA
-
SPEAKER TERMINAL WIRE GAUGE
Spade Connector
Recommended
-
FUSING
35Ax2
-
TOTAL HARMONIC DISTORTION (THD)
<0.05%
Features & Benefits
-
HI LEVEL INPUTS
High level inputs easily tie into OEM audio systems that do not offer RCA output. Molex connector is included
-
OPERATION MODE
2 channel operation mode allows either stereo or mono bridged operation
-
CROSSOVER TYPE
Variable electronic crossovers allow for complete control of the sound
-
ELECTRONIC EQUALIZER
Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers.
Check specifications for specific frequencies for this amplifier
-
CLASS / TOPOLOGY
Class A/B high sound quality circuit that allows amplifier to develop high levels of power with minimal distortion
-
OUTPUT DEVICE TECHNOLOGY
Exclusive Crunch SPEED-FET MOSFET components maximize power efficiency while improving sound quality and minimizing distortion
-
HEAT SINK
QTD (Quick Thermal Dispersion) technology assures the amplifier makes huge power while running very cool with nearly undetectable musical distortions
-
POWER SUPPLY
Rugged MOSFET Pulse Width Modulation power supply
Allows amplifier to product efficient power without taxing the vehicle electrical system
-
OUTPUT CONNECTIONS
Nickel-plated brass connectionwith hex set screw terminals allow for secure connection and resist erosion
-
CONNECTION TYPE
Secure connection for all power, ground and speaker connections.
-
FULL-RANGE RCA OUTPUTS FOR SIGNAL PASS THROUGH
Daisy chain multiple amplifier to eliminate additional signal cables from the source unit
-
LED SYSTEM PROTECTION CIRCUITRY DIAGNOSTICS
Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
A total of 4 guests made comments
John Smith - 2024-03-03
Incredible service! The shipping was faster than I expected, and the product quality exceeded my expectations. Definitely worth every penny!